Sunday, 26 October 2014

Second workshop: further brainstorming

During the second workshop, we were presented available equipment. We were offered to use projectors, Occulus Rift virtual reality glasses, Kinect, Arduino boards or Intel Galileo.

Our idea wasn't fully set at that moment so we used our time to talk about what we wanted to do for the project. We discussed our ideas for virtual keyboard with lab assistants. However it turned out that most of the proposals we came up with were already implemented or tested in some form and in general re-inventing a keyboard was not the best way to go.

After another series of the brainstorming, we started looking at devices that could control external hardware with our finger. We wanted to create a finger worn ring that could allow detecing touch on a finger what would make it possible to perform actions on small screens, such as smart watches etc.

We found some examples of similar devices:

Plex: finger-worn textile sensor for mobile interaction - it allows eye-free interactions with a device during activities, e.g. changing songs while running.
Plex


Fin: finger worn ring that turns a palm into a numerical keyboard for interactions with mobile devices



We also found a way of detecting on skin input using ultra sound, and we wanted to remove the need of wearing an entire piece of textile like in case of Plex. We found a project Sound of Touch that achieves detecting on skin input using the high frequency waves however the paper from Microsoft Research only presents example of detecting input on a forearm rather than a finger which would be much more challenging.


The equipment list we would need to collect:
  • ultra sound emitters, 
  • ultra sound receivers, 
  • motion sensors, 
  • arduino

No comments:

Post a Comment